Commercial Electrical Services in Minneapolis and St. Paul
When the lights go out in your building, you are not just dealing with an electrical problem. You are dealing with a closed storefront, a stalled production line, or a waiting room you have to empty. That is the difference between commercial and residential work, and it is why hiring a commercial electrician is a different decision than hiring one for your house.
Randy’s Electric & Plumbing has served the Twin Cities since Randy Smith founded the company in February 2002. We are family-owned, we are licensed and insured, and we hold more than 6,000 Google reviews averaging 4.8 stars. Call (763) 560-5600 or book online, and tell us what the building needs and when you can afford to have us in it.

We schedule around your business hours, not ours
The most expensive part of a commercial electrical job is usually not the work. It is the hours your building cannot be used while the work happens.
We plan around that. Our commercial hours are Monday through Friday, 7:00 AM to 5:00 PM. Inside that window, we can often start early, before you open, and we stage the work so the actual shutdown is as short as the job allows. We will be straight with you about what fits inside that window and what does not. If your project genuinely needs an overnight shutdown, we will say so during planning rather than discovering it on the day.
We also stage work so that the disruptive part is as short as possible. Pulling wire, mounting gear, and prepping terminations can often happen while you are open. The actual power-down is then measured in a defined window you can plan a closure around.
Three-phase power and what it changes
Most commercial buildings in the metro run three-phase service, and most residential electricians do not work with it daily. Three-phase changes the equipment, the load calculations, the balancing, and the safety procedure. It is also what most commercial HVAC, refrigeration, compressors, and larger motor loads require.
If you are adding equipment, the first question is not whether we can wire it. It is whether your existing service and panel can carry it. We perform the load calculation up front, because finding out mid-install that the service is undersized is how a two-day job becomes a three-week one.


Commercial lighting retrofits
Lighting is usually the highest-return electrical project a commercial building can do, because it touches the power bill every month and the customer experience every day. Retrofitting older fluorescent or metal halide fixtures to LED reduces load, reduces heat, reduces relamping labor, and generally improves how the space looks.
We handle fixture replacement, retrofit kits, driver and ballast work, occupancy and daylight sensors, and exterior and parking lot lighting. Utility rebate programs exist in Minnesota for qualifying commercial lighting upgrades, and the programs and their limits are set by the utility rather than by us. We will point you to the current program so you can check eligibility before you commit.
Tenant fit-out and build-out electrical
When a space changes hands, the electrical almost never matches what the new tenant needs. A retail unit becomes a clinic. An office becomes a restaurant. The lighting layout, the circuit count, the dedicated equipment lines, and the data and low-voltage rough-in all change with it.
We work with property managers, tenants, and general contractors on fit-out electrical. That covers demolition of redundant circuits, new lighting and controls, dedicated appliance and equipment lines, and panel and subpanel additions. We also coordinate with the inspection schedule, so the build does not stall waiting on us. Getting the electrician into the drawings early is one of the easiest ways to keep a fit-out on budget.

Emergency, Service Call, or Estimate?
Most commercial calls fall into one of three groups. Knowing which one yours is helps us send the right person at the right time.
Safety first: if there’s fire, smoke, active sparking, a burning smell you can’t trace, or anyone has been shocked, get everyone away from the area and call 911. If power lines are down or the whole street is dark, stay clear and call your utility. Once everyone is safe, call us and we’ll follow up.
Make the first call count. Have the service address with suite number, an on-site contact, who’s paying and any PO number, and any deadline, like an inspection, opening, or move-in date. If you have drawings or an inspector’s report, have those handy too. For the full checklist, read our guide for facility and property managers.
How a commercial job runs with Randy's
We start with a site visit and a diagnosis, because guessing at commercial scope from a phone call helps nobody. You get a written scope and a fixed price before work starts, and nothing is added afterwards. We agree the schedule and the shutdown window with you, not around you. We pull the state permit, complete the work, meet the inspector, and hand you the documentation.
Then we tell you what we noticed but did not fix, so you can plan for it rather than be surprised by it.
Talk to a commercial electrician about your building
Tell us what the building is, what is going wrong or what you are adding, and when you can afford the disruption. We will tell you honestly whether it is our work, and what it will take.
Call (763) 560-5600 or book online. Serving Minneapolis, St. Paul, and the surrounding metro, Monday through Friday.
FAQs About Commercial Electrical Services in the Twin Cities
Running a business is hard enough without worrying about breakers tripping, lights failing, or whether your wiring meets code. These FAQs cover common questions we hear from Twin Cities property managers and business owners.
If you need help with a specific building or are ready to schedule service, call Randy’s at (763) 560-5600.
Randy’s works with a wide range of commercial properties in the Minneapolis-St. Paul metro area, including:
If your building relies on everyday power for lights, outlets, and equipment, we can help. We perform practical commercial work that keeps your business operating safely and comfortably for staff and customers.Some of the common electrical services we provide to commercial clients include:
Call us right away if power is out to all or a major part of an operating business, or if a panel, breaker, or piece of equipment is hot, buzzing loudly, smoking, or has burn marks. The same goes for coolers, walk-ins, or kitchen equipment down at a restaurant, critical pumps or motors that have stopped, exit or emergency lighting that keeps you from legally opening, and live wiring exposed where people can reach it. A few lights or outlets out while the business keeps running can usually be scheduled as a regular service call. Learn more about our commercial emergency electrical service.
Get everyone away from the area and call 911 right away. Do the same for fire, active sparking, or a burning smell you can’t trace. If power lines are down or the outage covers the whole street, stay clear and call your utility company. Once everyone is safe, call us at (763) 560-5600 and we’ll follow up.
Your name and role, the business name, and a callback number and email. Then the service address with the suite or unit number, building name, and which entrance to use, plus the type of property and the name and phone number of whoever will meet our electrician. Tell us who’s paying (tenant, landlord, property manager, or general contractor) and whether you need a PO number. Finally, describe the problem or project in your own words, any deadline like an inspection, opening, or move-in date, and the site’s hours and access rules. Our commercial electrical guide walks through it in more detail.
For a repair, we book the first open slot on the schedule and confirm your day and time window. The technician gives you the price before any work starts. For a project like a buildout, LED retrofit, panel upgrade, EV charger install, or safety audit, our estimator meets you on site to look at the scope and puts together a written price.
Yes. Our electricians are fully licensed for electrical work in Minnesota, and Randy’s carries the required insurance and bonding for commercial projects. That means you are working with professionals who understand state and local requirements, pull permits when needed, and follow current electrical codes.
For property managers, this helps protect your tenants, your investment, and your peace of mind. For business owners, it means the work is done by a team that treats safety and compliance as part of the job, not an extra.
There are several electrical upgrades that can help lower utility bills and improve comfort in commercial spaces. Randy’s can assist with:
In commercial properties, some of the most common problems we see include:
Yes. Randy’s can perform electrical inspections and testing for commercial buildings in the Twin Cities. This often includes reviewing panels and feeders, testing outlets and lighting circuits, checking GFCI and AFCI protection, and confirming that critical systems such as emergency lighting and exit signs operate correctly.
We present our findings clearly to ensure clients fully understand any issues, prioritize any recommended repairs, and complete the corrective work if you choose. Whether you are preparing for a sale, a lease, or a city inspection, our team can help you understand the condition of your electrical system and what it needs.
Our commercial hours are Monday through Friday, 7:00 AM to 5:00 PM. Within those hours, we can often start early, before you open, and we plan the work so your power is off for as short a time as possible. If a job genuinely needs work outside those hours, we will tell you during planning rather than on the day.
That depends on the work, and we will give you a defined window before you commit. We stage as much as possible while you stay open, so the actual power-down is as short as the job allows. You choose the day and the window wherever the work allows a choice.
The State of Minnesota does, through the Department of Labor and Industry’s Board of Electricity, not your city. This surprises many building owners. We pull the permit, meet the state inspector, and give you the closed-out paperwork for your records.
Minnesota enforces the 2026 National Electrical Code, in force for permits filed on or after 17 August 2026. Commercial occupancies carry requirements a home does not, including egress and emergency lighting, exit sign circuits, and clear working space in front of electrical equipment.
Yes. Most commercial buildings in the metro run three-phase service, and it is a routine part of commercial work. Before adding equipment, we run a load calculation to confirm your existing service and panel can carry it.
We handle electrical rough-in and trim inside existing buildings and tenant spaces, including tenant improvement buildouts, remodels, and office and retail rewiring. Ground-up new construction is outside our commercial scope. See our commercial rough-in and trim and tenant improvement electrical services.
We install the dedicated electrical circuit your fire alarm system needs, whether it’s new or a replacement, and we coordinate with your fire alarm vendor. The alarm devices, programming, monitoring, and testing stay with your fire alarm company. Learn more about fire alarm dedicated circuits.
Yes. Code corrections are routine commercial work for us. Tell us who issued the correction (the city, the fire marshal, or your insurer) and the deadline, and send us the report if you have it. Learn more about our commercial electrical inspections.
Yes. We perform electrical safety audits for commercial buildings and NFPA 70E arc flash labeling for panels and electrical gear. Let us know who’s asking for it, the building’s size and type, and any deadline. See our electrical safety audits and arc flash labeling services.
Yes. We wire new and replacement rooftop units and HVAC equipment, hook up restaurant kitchen equipment, power new and existing signs, and run controls wiring for building automation contractors. Learn more about HVAC and rooftop unit electrical, kitchen equipment hookups, sign hookups, and building automation wiring.
Send your drawings and bid due date to connect@callrandys.com, and our team will confirm we received them.
Yes. We offer preventive maintenance agreements, scheduled panel and breaker inspections, and priority response agreements for facility and property managers. Tell us how many buildings you manage and what equipment matters most, and our commercial team will reach out to talk through options. Learn more about preventive maintenance agreements.
Yes. Randy’s Electric & Plumbing is a licensed electrical contractor and fully insured. Tell us where to send the certificate, and we can name additional insureds when your lease or contract requires it.
We serve the 7-county Twin Cities metro: Anoka, Carver, Dakota, Hennepin, Ramsey, Scott, and Washington counties. If your building is outside those counties, call us anyway and we’ll let you know.
We diagnose first, then give you a fixed price before work starts, and nothing is added afterwards. For fit-out and larger projects, that comes as a written scope with the shutdown sequence included, so you can see exactly what happens and when.
Partner With a Reliable Commercial Electrician in the Twin Cities
Flickering fixtures, overloaded outlets, and aging electrical panels can disrupt operations and cause concern for tenants. Randy’s provides licensed commercial electrical services with clear communication, timely scheduling, and respect for your space.
Contact our Twin Cities team today to plan repairs, upgrades, or new circuits for your office, shop, or facility.
