When the power drops in half your building on a Tuesday morning, the phone calls start fast: tenants, staff, the owner, maybe a customer standing in a dark storefront. The quickest way to get the lights back on is a clear first call to your electrician. That means knowing whether it’s an emergency, what kind of visit you need, and what information to have ready.
This guide is for Twin Cities facility managers, property managers, business owners, and general contractors. It’s built from the same questions our commercial team asks on every call, so you’ll know exactly what to expect when you reach Randy’s Electric & Plumbing.
The Short Answer
Most commercial electrical calls fall into one of three groups:
An emergency when power, safety, or your ability to open is at stake right now. A service call when something is broken but the business is still running. An on-site estimate when you’re planning a project, like an LED retrofit, a tenant buildout, a panel upgrade, or EV chargers.
Tell us which one it is, give us the details below, and we’ll take it from there.
Safety First
If there’s fire, smoke, active sparking, a burning smell you can’t trace, or anyone has been shocked or hurt, get everyone away from the area and call 911. Don’t stay on the phone with us first.
If power lines are down or the whole street is dark, the problem is likely on the utility side. Stay clear and call your utility company. Once everyone is safe, call us at (763) 560-5600 and we’ll follow up.
Is It an Electrical Emergency?
| Call us right away | Usually can be scheduled |
| Power is out to all or a major part of an operating business | A few lights or outlets are out, and the business is otherwise running |
| A panel, breaker, or piece of equipment is hot, buzzing loudly, smoking, or has burn marks | Parking lot or exterior lights are out, unless it’s a security or safety issue tonight |
| Coolers, walk-ins, or kitchen equipment are down at a restaurant or food business | LED retrofits, upgrades, buildouts, EV chargers, and audits |
| Critical pumps or motors are down: sump, water supply, or process equipment | Code corrections with a deadline more than 48 hours away |
| Exit or emergency lighting is out in an occupied building, and you can’t legally open | |
| Live wiring is exposed where people can reach it |
Service Call or Estimate? What Happens Next
Service and repair calls
For tripped breakers, flickering lights, dead outlets, or a fixture that quit, we book the first open slot on the schedule and confirm your day and time window. The technician calls when they’re on the way and gives you the price before any work starts. Learn more about commercial electrical repair and troubleshooting.
Projects and estimates
For tenant improvement buildouts, LED retrofits, panel upgrades, EV chargers, switchgear, safety audits, and arc flash labeling, our estimator meets you on site to look at the scope. Then we put together a written price. Commercial scope is hard to judge over the phone, and a site visit keeps surprises out of the plan.
General contractors and bids
Send your drawings and bid due date to connect@callrandys.com, and our team will confirm we received them.
What to Have Ready When You Call
A complete first call saves a second trip. Here’s what our team will ask for:
| What we’ll ask | Why it matters |
| Your name, role, and company | Facility manager, property manager, owner, tenant, or GC: it tells us who’s authorizing the work |
| Callback number and email | We’ll repeat both back so updates reach you |
| Service address | Include the suite or unit number, building name, which entrance to use, and where to park |
| Type of property | Office, retail, restaurant, warehouse, medical, multi-tenant, or industrial |
| On-site contact | The name and phone number of whoever will meet our electrician |
| Who’s paying | Tenant, landlord, property manager, or GC, and whether you need a PO number |
| The problem or project | In your own words, plus details like which areas are affected and whether anything changed recently |
| Urgency or deadline | Emergency, next available, or a date tied to an inspection, opening, or move-in |
| Access and hours | When the site is open and any after-hours access rules |
Commercial Electrical Work We Handle
If what you need isn’t listed here, call anyway. We’ll take the details and have our estimator follow up.
| Type of work | You might tell us… |
| Troubleshooting and repair | “Half the building lost power,” “the breaker won’t reset,” “the outlets in the break room quit” |
| Interior lighting and LED retrofits | “We want to switch to LED,” “a bank of lights is out in the warehouse” |
| Parking lot and exterior lighting | “The parking lot lights are out,” “the wall packs stay on all day” |
| Emergency and exit lighting | “The fire marshal flagged our exit signs,” “the battery lights failed the test” |
| Lighting controls and sensors | “The lights won’t shut off,” “we want motion sensors in the restrooms” |
| Panel upgrades and sub-panels | “Our panel is full,” “the new tenant needs their own panel” |
| Switchgear and transformer service | “The transformer is humming,” “we need switchgear maintenance” |
| Surge protection and power quality | “Our equipment keeps getting fried,” “we want whole-building surge protection” |
| Tenant improvement buildouts and remodels | “We’re building out a new suite,” “we’re rearranging the office and need more outlets” |
| HVAC and rooftop unit connections | “The new RTU needs to be wired,” “our HVAC company needs an electrician” |
| Kitchen equipment hookups | “Our new fryer, oven, or walk-in needs a hookup” |
| Motor and pump wiring | “The pump motor isn’t running,” “we need a motor wired” |
| EV charging stations | “We want chargers for our lot,” “we’re adding chargers for our fleet” |
| Fire alarm dedicated circuits | “Our fire alarm company needs a dedicated circuit” |
| Code compliance corrections | “The inspector wrote us up,” “we need corrections before our CO” |
| Electrical safety audits and NFPA 70E arc flash labeling | “Our insurance wants an electrical inspection,” “we need arc flash labels” |
| Preventive maintenance agreements | “We want a maintenance contract,” “I manage several properties and need someone reliable” |
| Sign hookups and building automation wiring | “Our new sign needs power,” “our controls contractor needs wiring” |
What’s Outside Our Commercial Scope
We’d rather tell you up front than waste your time:
- Ground-up new construction. We do rough-in and trim inside existing buildings and tenant spaces.
- Fire alarm systems themselves. We provide the dedicated circuit. Devices, programming, monitoring, and alarm testing stay with your fire alarm vendor.
- Solar installation.
- Buildings outside the 7-county metro. We serve Anoka, Carver, Dakota, Hennepin, Ramsey, Scott, and Washington counties.
How Pricing Works
Commercial pricing depends on what we find on site, so we don’t quote over the phone. On a service call, the technician gives you the price before any work starts. For larger projects, our estimator puts together a written price after the site visit.
Licensed, Insured, and Ready to Send a COI
Randy’s Electric & Plumbing is a licensed electrical contractor and fully insured. Tell us where to send a certificate of insurance, and we’ll get it to you or your property manager before we start.
Talk to Our Commercial Team
We’ve served Twin Cities neighbors, homes and businesses alike, for more than 20 years. Whether your building is down right now or you’re planning next year’s retrofit, we’ll tell you clearly what happens next.
Prefer to talk it through? Call (763) 560-5600 or visit our commercial electrical services page.
Commercial Electrical FAQs
If power is out to all or a major part of an operating business, yes. Call us right away. If the whole street is dark or lines are down, call your utility first, since the problem is likely on their side. A few lights or outlets out while the business keeps running can usually be scheduled as a regular service call.
If a breaker is hot, buzzing, smoking, or has burn marks, stay clear of the panel and call us right away. For a breaker that keeps tripping, call us to schedule a service call so a licensed electrician can find the cause. Learn more about commercial circuit and breaker services.
We handle electrical rough-in and trim inside existing buildings and tenant spaces, including tenant improvement buildouts and remodels. Ground-up new construction is outside our commercial scope.
We install the dedicated electrical circuit your fire alarm system needs and coordinate with your fire alarm vendor. The alarm devices, programming, monitoring, and testing stay with your fire alarm company.
No. Commercial pricing depends on what we find on site. On a service call, the technician gives you the price before any work starts. For projects, our estimator puts together a written price after the site visit.
Yes. We offer preventive maintenance agreements, scheduled panel and breaker inspections, and priority response agreements for facility and property managers. Tell us how many properties you manage, and our commercial team will reach out to talk through options.


